Pages Navigation Menu

Floor Coating

coating is a covering that is applied to the surface of an object, usually referred to as the substrate. In many cases coatings are applied to improve surface properties of the substrate, such as appearance, adhesion, wetability, corrosion resistance, wear resistance, and scratch resistance. In other cases, in particular in printing processes andsemiconductor device fabrication (where the substrate is a wafer), the coating forms an essential part of the finished product.

Coating and printing processes involve the application of a thin film of functional material to a substrate, such as paper, fabric, film, foil, or sheet stock. This article discusses what is frequently termed “roll-to-roll” or “web-based” coating. A roll of substrate, when wound through the coating machine, is typically called a web.

Coatings may be applied as liquids, gases or solids. Coatings can be measured and tested for proper opacity and film thickness by using a drawdown card.

Coating processesPrinting (text or decoration) such as on paper, fabric, and flexible packaging. As used in the converting industry.Functions

  • Self adhesive properties such as for tape, labels, and packaging
  • Melt-adhesive properties such as for vacuum seal and heat seal applications
  • “Release” coatings such as the liner of a double-sided tape or vinyl stickers
  • Low surface energy coatings to act as a non-stick surface
  • Optical properties such as tint, color, anti-reflection, and holographics
  • Photo-sensitivity such as for photographic film and paper
  • Electronic properties such as passivity or conduction as with flexible circuits
  • Magnetic properties such as for magnetic media like cassette tapes and floppy disks
  • Water-resistant or waterproof coatings, such as for fabrics or paper, or on wood surfaces such as outdoor furniture, patio decks, yacht hulls, and decks
  • Scent properties such as scratch and sniff stickers and labels

Coating processes are classified as follows:

Chemical vapor deposition

Main article: Chemical vapor deposition
  • Metalorganic vapour phase epitaxy
  • Electrostatic spray assisted vapour deposition (ESAVD)

Physical vapor deposition

Main article: Physical vapor deposition
  • Cathodic arc deposition
  • Electron beam physical vapor deposition (EBPVD)
  • Ion plating
  • Ion beam assisted deposition (IBAD)
  • Magnetron sputtering
  • Pulsed laser deposition
  • Sputter deposition
  • Vacuum deposition
  • Vacuum evaporation, evaporation (deposition)

Chemical and electrochemical techniques

  • Anodising
  • Conversion coating
    • Anodizing
    • Chromate conversion coating
    • Plasma electrolytic oxidation
    • Phosphate (coating)
  • Ion beam mixing
  • Pickled and oiled, a type of plate steel coating
  • Plating
    • Electroless plating
    • Electroplating
  • Sol-gel

Spraying

  • High velocity oxygen fuel (HVOF)
  • Plasma spraying
  • Thermal spraying
    • Plasma transferred wire arc thermal spraying

[edit]Optical coatings

Main article: optical coating
  • Antireflection coating, to reduce reflection
  • A mirror coating to enhance it

Other

  • Dip-coating
  • Epitaxy (vapor phase, liquid phase)
  • Vitreous enamel
  • Paint
    • Enamel paint
    • Silicate mineral paint
  • Polymer coatings, such as Teflon
  • Powder coating or Powder slurry coating
    • Fusion bonded epoxy coating (FBE coating)
  • Molecular beam epitaxy
  • Sheradizing
  • Spin coating
  • Paper coating
  • Industrial coating

Roll-to-roll coatings

Common roll-to-roll coating processes include:

  • Air knife coating
  • Anilox coater
  • Curtain Coating
  • Single and Multilayer Slide Coating
  • Flexo coater
  • Gap Coating
  • Gravure coating
  • Hot Melt coating
  • Immersion (dip) coating
  • Knife-over-roll coating
  • Metering rod (Meyer bar) coating
  • Reverse Roll coating
  • Roller coater
  • Rotary screen
  • Silk Screen coater
  • Slot Die (Extrusion) coating[1]

The main coating and varnishes for the printing industry include:

  • Overprint varnish
  • Water based coating
  • Acrylic based
  • Solvent based
  • Aqueous coating
  • UV Coating – curing (chemistry)

Standards

  • ISO 1461 Hot dip galvanized coatings on fabricated iron and steel articles—Specifications and test methods
  • ISO 4042 Fasteners—Electroplated coatings
  • ISO 10683 Fasteners—Non-electrolytically applied zinc flake coatings
  • ISO 10684 Fasteners—Hot dip galvanized coatings
  • ISO 12944 Paints and varnishes—Corrosion protection of steel structures by protective paint systems—Part 6: Laboratory performance test methods